Schenken Sie Ihrer Karriere Coursera Plus mit einem Rabatt von $160 , der jährlich abgerechnet wird. Sparen Sie heute.

Diese kurs ist nicht verfügbar in Deutsch (Deutschland)

Wir übersetzen es in weitere Sprachen.
L&T EduTech

Pipe Material Specification

1.713 bereits angemeldet

Bei Coursera Plus enthalten

Verschaffen Sie sich einen Einblick in ein Thema und lernen Sie die Grundlagen.
4.3

(23 Bewertungen)

Stufe Mittel

Empfohlene Erfahrung

Es dauert 12 Stunden
3 Wochen bei 4 Stunden pro Woche
Flexibler Zeitplan
In Ihrem eigenen Lerntempo lernen
Verschaffen Sie sich einen Einblick in ein Thema und lernen Sie die Grundlagen.
4.3

(23 Bewertungen)

Stufe Mittel

Empfohlene Erfahrung

Es dauert 12 Stunden
3 Wochen bei 4 Stunden pro Woche
Flexibler Zeitplan
In Ihrem eigenen Lerntempo lernen

Kompetenzen, die Sie erwerben

  • Kategorie: Working professionals with B.Tech./B.E., in Mechanical / Chemical / Petro-Chemical/ Instrumentation
  • Kategorie: Knowledge of Fluid Mechanics, Strength of materials
  • Kategorie: Graduate students of Mechanical / Chemical / Petro-Chemical/ Instrumentation
  • Kategorie: Undergraduate students of Mechanical / Chemical / Petro-Chemical/ Instrumentation who are in either Vth, VIth, VIIth or VIIIth semester
  • Kategorie: Diploma students of Mechanical / Chemical / Petro-Chemical/ Instrumentation

Wichtige Details

Zertifikat zur Vorlage

Zu Ihrem LinkedIn-Profil hinzufügen

Bewertungen

4 Aufgaben

Unterrichtet in Englisch

Erfahren Sie, wie Mitarbeiter führender Unternehmen gefragte Kompetenzen erwerben.

Platzhalter

Erweitern Sie Ihre Fachkenntnisse

Dieser Kurs ist Teil der Spezialisierung Spezialisierung Design of Industrial Piping Systems
Wenn Sie sich für diesen Kurs anmelden, werden Sie auch für diese Spezialisierung angemeldet.
  • Lernen Sie neue Konzepte von Branchenexperten
  • Gewinnen Sie ein Grundverständnis bestimmter Themen oder Tools
  • Erwerben Sie berufsrelevante Kompetenzen durch praktische Projekte
  • Erwerben Sie ein Berufszertifikat zur Vorlage
Platzhalter
Platzhalter

Erwerben Sie ein Karrierezertifikat.

Fügen Sie diese Qualifikation zur Ihrem LinkedIn-Profil oder Ihrem Lebenslauf hinzu.

Teilen Sie es in den sozialen Medien und in Ihrer Leistungsbeurteilung.

Platzhalter

In diesem Kurs gibt es 4 Module

This module fully deals with pipes, pipe fittings, flanges, gaskets, and bolting. To begin with, the difference between pipe and tube is discussed as these two terminologies confuse the learner along with the definition of pipe mentioned in the ASME B31 series pressure piping code. Pipe size identification in terms of Nominal Bore, Nominal Pipe Size, and Nominal Diameter is discussed. The standards, ASME B36.10M and ASME B36.19M that provide the pipe dimensions of welded and seamless wrought steel pipe and stainless steel pipe are covered. The differences between code, standard, and specification are included in this module so that learners can differentiate them. The emergence of pipe schedule numbers and their importance and the demonstration of pipe dimensions and weights referring to ASME B36.10M and ASME B36.19M standards are presented systematically. Next, the methods and techniques of manufacturing pipes, and ‘pipe materials and their applications’ based on ASTM, API, and IS standards are covered. Types of pipe end that assist in the appropriate pipe end selection for joining using the right method for the given service and pipe size including the ‘pipe fitting ends’ are elaborated. Determination of pipe wall thickness, and selection of the right pipe schedule number are demonstrated considering practical problems including the extra life that is served by the pipe. Various fittings, their dimensions, and the class referring to the corresponding standards like ASME B16.9, and ASME B16.11 are illustrated. The need for the flange joint, flange end attachments or connections, types of flange facing, flange dimensions, flange materials, and flange class termed as a pressure-temperature rating referring to ASME B16.5 and 16.1 standards are covered systematically. Interestingly, the flange outside diameter, pitch circle diameter, the diameter of the bolt hole, and the number of bolts based on flange class and pipe size are presented. The types of gaskets, dimensions of gaskets referring to ASME B16.21 standard, bolting materials, dimensions of nuts and bolts referring to ASTM B18.2.2 standard, and method of stud and bolt lengths are meticulously covered. Finally, the advantages and limitations of all pipe fittings are included in this module.

Das ist alles enthalten

24 Videos1 Lektüre1 Aufgabe

In a process industry, a significant share of the fixed capital cost goes toward the procurement of valves. It is interesting to know that the piping components where valves are part of it, share around 30 to 40% of the fixed capital cost of the process plant. In that around 10% is the share of valves. Further, valve cost does not vary linearly with size but varies exponentially. Therefore, it is of utmost importance to the designer to know the various types of valves used in the process industry, their internal construction, advantages, and limitations so that the designer can select the appropriate valve for the given process application. The resistance offered by each valve depends on its internal construction which is responsible for the generation of fluid turbulence. The designer realizes why a certain valve offers more fluid resistance from its internal construction. The function of some of the valves is isolation and the function of other valves is regulation and unidirectional. The present module covers all these aspects in detail so that learners get acquainted with all sorts of valves which helps them in better design of the piping system. ‘Reading and understanding’ thoroughly 2D drawings such as Process Flow Diagram, PFD, Piping and Instrumentation Diagram, P&ID, Orthographic drawings, and Isometric drawings is one of the skills that a piping engineer must possess. The piping layout is developed in orthographic views and details are added for lucidity wherever required. These are General Arrangement, GA drawings. Certain symbols are used to present a three-plane piping system on a 2D sheet. These symbols are orthographic. For clarity, isometric views are preferred where orthographic views cannot accommodate the design details fully. This happens with complex piping systems. The piping layout is drawn on different sizes of drawing sheets such as A0, A1, A2, etc. To prepare and read the P&IDs, the designers must familiarize themselves with general abbreviations, service codes, line number identification, ‘insulation and heat tracing codes’, representations of pipelines, boundaries, off-page connectors, pipe fittings, piping valves, piping components, fire, and safety. All these aspects are discussed in this module. Finally, the 3D modeling of the process plant, its advantages, and the software that are being implemented by the EPC and EPCM companies across the globe are covered in this module. This is indeed a special module a learner must go through.

Das ist alles enthalten

19 Videos1 Aufgabe

This is a crucial module in the design of the piping systems and plays a major role in deciding and fixing the most optimum and safe piping layout. Piping integrity is the ultimate objective of the design of piping systems. Pipes are used to transport fluids such as flammable, inflammable, toxic, non-toxic, corrosive, non-corrosive, etc., from one equipment to another equipment at operating conditions varying from very low to very high and the transportation happens throughout the life cycle of the plant. These are some of the most demanding entities in the process industry. Similar to the equipment in the process industry, pipes are subjected to all kinds of loads such as static loads, and dynamic loads loads. It is essential to take into account all possible loads during the design of the pipe, pipe erection, pipe hydraulic test, transient operating conditions such as ‘start-up operation, emergency operation, shutdown operation’, maintenance, and regular operating conditions. Missing any load may lead to catastrophic failure of the piping system. Hence, one should not exclude any possible load and It is customary to say that one should achieve 100% perfectness or accuracy while designing the piping system. The types of loads are constant loads and cycling loads, therefore, pipe failure may be a catastrophic failure or fatigue failure. The induced stresses in the pipe wall due to these possible loads are longitudinal, circumferential, bending, and torsional. Therefore, theories of failures are used to confirm the integrity of the piping system as the piping system in general is a complex stress system. The degree of flexibility of the piping system decides the safety of the piping system and keeps the induced stresses below the allowable stresses. The piping system should not be too flexible as it increases the piping fixed and running cost, occupies more plant space, and becomes a hindrance to the process equipment and other facilities in the plant. The designer has to see that the induced stress should be around 85% of allowable stress which is optimum. The flexibility analysis can be performed analytically up to some extent. If the piping system is complex in terms of applied loads, an analytical solution is not accurate, and cumbersome exercise. The only option is to perform the flexibility analysis using the software. The present module focuses on all these aspects. These aspects are well covered and demonstrated through solving practical problems. Introduced the industry-accepted software “CAE PIPE” which is a freeware with full features but limited piping components entries in the module and the flexibility analysis of medium to complex piping systems is carried out using software.

Das ist alles enthalten

17 Videos1 Aufgabe

An above-ground piping system cannot be simply placed either on the Earth's surface or in space without proper primary and secondary supports. Even underground piping needs proper bedding beneath the pipe. Indeed, supports perform three vital roles - to provide stability to the piping system, control the pipe movements, and complete the pipe routing as per the piping layout. There are different kinds of piping supports. Each support has its role in bringing stability to the piping system. Pipe supports are the elements that carry the pipe load from below the pipe and hence subjected to compressive force. Whereas pipe hangers are the elements that carry the pipe load from above and hence are subjected to tensile force. One can find different kinds of supports and hangers. Each has its purpose and characteristics. This module addresses the piping supports in all aspects. Good practices are not covered by the codes and standards and these are the learnings from practical experience. The good practices that are supposed to be followed during the layout of the equipment and piping systems are covered in this module. Due to space limitations and other restrictions, a change of pipe routing or inclusion of U-type expansion loops in the piping system may not be feasible to enhance the flexibility of the piping system to the required level. The alternative is to introduce the expansion joints in the piping system. Important types of expansion joints, functions, end connections, and their movements are covered. When highly viscous liquids are transported through the piping system, it is obvious that they need to be maintained at a higher temperature than the ambient temperature. This is one example of why heat tracing or jacketed piping is needed. This course includes the design of jacketed piping and its applications. Piping systems are subjected to ‘mechanically induced vibrations’ due to vibrating equipment like pumps and ‘hydraulic induced vibrations’ due to continuous fluid pressure pulses. Vibrations may fail the piping system. Functions of insulation, types of insulation, material, and shapes are discussed along with pipe vibrations in this particular module. Why choose buried pipe, what benefits does one get from underground piping, what major issues faced from underground piping, and how they can be addressed are covered in this particular module. Finally, what is cathodic protection, how does it mitigate the corrosion problem of underground piping, what types of cathodic protection, and how does external coating help in corrosion control through the cathodic protection technique are explained so that learners can understand what other decision-making to be taken while designing the piping system.

Das ist alles enthalten

15 Videos1 Aufgabe

Dozent

Lehrkraftbewertungen
2.9 (7 Bewertungen)
Subject Matter Expert
L&T EduTech
90 Kurse57.398 Lernende

von

L&T EduTech

Empfohlen, wenn Sie sich für Mechanical Engineering interessieren

Warum entscheiden sich Menschen für Coursera für ihre Karriere?

Felipe M.
Lernender seit 2018
„Es ist eine großartige Erfahrung, in meinem eigenen Tempo zu lernen. Ich kann lernen, wenn ich Zeit und Nerven dazu habe.“
Jennifer J.
Lernender seit 2020
„Bei einem spannenden neuen Projekt konnte ich die neuen Kenntnisse und Kompetenzen aus den Kursen direkt bei der Arbeit anwenden.“
Larry W.
Lernender seit 2021
„Wenn mir Kurse zu Themen fehlen, die meine Universität nicht anbietet, ist Coursera mit die beste Alternative.“
Chaitanya A.
„Man lernt nicht nur, um bei der Arbeit besser zu werden. Es geht noch um viel mehr. Bei Coursera kann ich ohne Grenzen lernen.“

Bewertungen von Lernenden

Zeigt 3 von 23

4.3

23 Bewertungen

  • 5 stars

    56,52 %

  • 4 stars

    26,08 %

  • 3 stars

    4,34 %

  • 2 stars

    13,04 %

  • 1 star

    0 %

JR
4

Geprüft am 23. Okt. 2024

PM
5

Geprüft am 30. Aug. 2024

Platzhalter

Neue Karrieremöglichkeiten mit Coursera Plus

Unbegrenzter Zugang zu über 7.000 erstklassigen Kursen, praktischen Projekten und Zertifikatsprogrammen, die Sie auf den Beruf vorbereiten – alles in Ihrem Abonnement enthalten

Bringen Sie Ihre Karriere mit einem Online-Abschluss voran.

Erwerben Sie einen Abschluss von erstklassigen Universitäten – 100 % online

Schließen Sie sich mehr als 3.400 Unternehmen in aller Welt an, die sich für Coursera for Business entschieden haben.

Schulen Sie Ihre Mitarbeiter*innen, um sich in der digitalen Wirtschaft zu behaupten.

Häufig gestellte Fragen