Real-Time Mission-Critical Systems Design

Give your career the gift of Coursera Plus with $160 off, billed annually. Save today.

Real-Time Mission-Critical Systems Design

Name: Real-Time Mission-Critical Systems Design
Rating: 4.214285714285714 (14 reviews)

This course is part of Real-Time Embedded Systems Specialization

Instructor: Sam Siewert

4,177 already enrolled

Included with Coursera Plus

Learn more

4 modules

Gain insight into a topic and learn the fundamentals.

4.2

(14 reviews)

Intermediate level

Recommended experience

Flexible schedule

Approx. 50 hours

Learn at your own pace

Build toward a degree

Learn more

4 modules

Gain insight into a topic and learn the fundamentals.

4.2

(14 reviews)

Intermediate level

Recommended experience

Flexible schedule

Approx. 50 hours

Learn at your own pace

Build toward a degree

Learn more

What you'll learn

Use of SECDED (Single Error Correction, Double Error Detection) codes for ECC (Error Correction Code) memories
How flash file systems work, along with wear leveling and the write amplification metric
Differences and common characteristics of high availability and high reliability
Methods and design for redundant hardware with cross strapping and recovery

Skills you'll gain

Details to know

Shareable certificate

Add to your LinkedIn profile

Assessments

4 quizzes

Taught in English

See how employees at top companies are mastering in-demand skills

Learn more about Coursera for Business

Build your subject-matter expertise

This course is part of the Real-Time Embedded Systems Specialization

When you enroll in this course, you'll also be enrolled in this Specialization.

Learn new concepts from industry experts
Gain a foundational understanding of a subject or tool
Develop job-relevant skills with hands-on projects
Earn a shareable career certificate

Earn a career certificate

Add this credential to your LinkedIn profile, resume, or CV

Share it on social media and in your performance review

There are 4 modules in this course

This course can also be taken for academic credit as ECEA 5317, part of CU Boulder’s Master of Science in Electrical Engineering degree.

Upon completion of this course the learner will know the difference between systems you can bet your life on (mission critical) and those which provide predictable response and quality of service (reliable). This will be achieved not only by study of design methods and patterns for mission critical systems, but also through implementation of soft real-time systems and comparison to hard real-time. Methods of verification to determine ability to meet mission critical as well as soft real-time requirements will be learned so that the learner can properly assess risk, reliability and impact of failure in real-time systems. At the end of this course learners will be able to apply an architectural style (cyclic executive, RTOS, or embedded Linux) to more detailed design of a mission critical system, a soft real-time system, or a mixed hard and soft real-time system, including: ● Thorough understanding of hardware/software device interfaces and resource view for hardware abstraction layers (HAL, BSP) ● Design trade-offs with different real-time hardware architectures including single core, multi-core, hybrid-FPGA, GP-GPU, and DSP systems, with emphasis on multi-core ● Mission critical embedded systems architecture and key design elements ● Fault tolerant processing, memory, and I/O concepts

This module covers RTES software to hardware interface using device abstraction and driver interfaces as well as system scaling.

What's included

11 videos1 reading1 quiz2 peer reviews1 discussion prompt

11 videosTotal 224 minutes

Course Goals and Learning Objectives5 minutesPreview module
Detailed Overview - with Course Assumed Prior Knowledge39 minutes
Scalable Embedded I/O Bus Architectures25 minutes
Demonstration: I/O, CPU, or Memory Bound?13 minutes
Drivers and Device Interfaces22 minutes
Using Linux UVC Driver to Acquire Video Frames with OpenCV and V4L223 minutes
Digging Deeper into V4L2 API and UVC Driver (Camorama, V4L2-Ctl, etc.)20 minutes
Code Walkthrough: Bt878 VxWorks RTOS Device Interface20 minutes
Key Differences between Linux and RTOS Drivers10 minutes
RT Services Communication and Synchronization27 minutes
Using Point-to-point Serial and TCP/IP for Embedded Systems14 minutes

1 readingTotal 30 minutes

EXTRA HELP - Home Lab Setup30 minutes

1 quizTotal 30 minutes

Quiz 1 - Device Interfaces and Software Drivers30 minutes

2 peer reviewsTotal 600 minutes

Using Message Queues or Ring Buffers with Video Data420 minutes
Host Client Data Acquisition from an Embedded TCP/IP Server180 minutes

1 discussion promptTotal 10 minutes

Introduce Yourself10 minutes

This module covers use of key algorithms such as error correct codes, redundant arrays of devices, and use of flash file systems with persistent memory.

What's included

11 videos1 quiz2 peer reviews

11 videosTotal 223 minutes

Why We Need ECC? - Single Event Upset Fault Tolerance16 minutesPreview module
SECDED Approach to Memory Protection22 minutes
Hamming SECDED Formulation Walk-through24 minutes
Analysis: SECDED ECC Using a Model (Excel)6 minutes
SECDED ECC Software Emulator29 minutes
Flash memory Hardware Device Overview24 minutes
Flash file systems - Sector Erase Wear Leveling - Introduction23 minutes
Flash Wear Leveling Example - Conclusion31 minutes
RAID for RT Embedded Systems Mission Critical Data18 minutes
Code Demonstration: XOR RAID for Data Loss Fault Tolerance17 minutes
Code Walkthrough: File Based RAID 5 for RTES8 minutes

1 quizTotal 30 minutes

Quiz 2 - Safe Working and Persistent Memory30 minutes

2 peer reviewsTotal 600 minutes

Testing the SECDED ECC Emulator420 minutes
Linux Software RAID for Data Protection - by Experiment180 minutes

Service software implementation efficiency and optimization methods are covered so that computations can be completed by deadlines. Methods of profiling and tracing applications as well as the whole system are covered.

What's included

9 videos1 quiz1 peer review

9 videosTotal 127 minutes

Optimizing Single threaded code with the compiler9 minutesPreview module
Optimizing code - thread level (sequential and parallel)20 minutes
Tracing and Profiling Tools Overview27 minutes
Tracing and profiling application code (gcov, syslog, and gprof)12 minutes
Profiling and Tracing your platform and application with Sysprof and Kernelshark8 minutes
Tracing Linux kernel and network stack events3 minutes
Overview of Top Linux Programming Errors14 minutes
Note on Linux Methods of Synchronization17 minutes
Best Practices for RTES Programming14 minutes

1 quizTotal 30 minutes

Quiz 3 - Methods of tracing and debugging30 minutes

1 peer reviewTotal 480 minutes

Embedded File Based RAID Optimization and Co-processing480 minutes

This module integrates fault tolerant and recovery methods with overall strategies for system level fault detection, isolation and recovery. Design with consideration of failure modes and effects analysis is covered along with redundancy management for high availability.

What's included

5 videos1 quiz1 peer review

5 videosTotal 120 minutes

FDIR - Fault Detection, Isolation, and Recovery - Theory32 minutesPreview module
High Availability Definition in terms of 5 9's uptime or better34 minutes
System Integration Testing (Hardware, Firmware, and Software)20 minutes
Making software reliable with SQA19 minutes
Infamous Mission Critical System Failures - Root Cause Analysis13 minutes

1 quizTotal 30 minutes

Quiz 4 - High Availability and High Reliability30 minutes

1 peer reviewTotal 480 minutes

Choose the Worst Real-Time Design Failure, Investigate the Root Cause and Present480 minutes

Instructor

Instructor ratings

4.9 (8 ratings)

Sam Siewert

University of Colorado Boulder

4 Courses20,397 learners

Offered by

University of Colorado Boulder

Recommended if you're interested in Electrical Engineering

University of Colorado Boulder
Introduction to FPGA Design for Embedded Systems
Course
EDUCBA
ARM Cortex (STM32) Deep Dive: Mastering Embedded Systems
Course
University of Alberta
Software Design and Architecture
Specialization
EDUCBA
Embedded Software Development with C
Specialization

Build toward a degree

This course is part of the following degree program(s) offered by University of Colorado Boulder. If you are admitted and enroll, your completed coursework may count toward your degree learning and your progress can transfer with you.¹

Why people choose Coursera for their career

Felipe M.

Learner since 2018

"To be able to take courses at my own pace and rhythm has been an amazing experience. I can learn whenever it fits my schedule and mood."

Jennifer J.

Learner since 2020

"I directly applied the concepts and skills I learned from my courses to an exciting new project at work."

Larry W.

Learner since 2021

"When I need courses on topics that my university doesn't offer, Coursera is one of the best places to go."

Chaitanya A.

"Learning isn't just about being better at your job: it's so much more than that. Coursera allows me to learn without limits."

Open new doors with Coursera Plus

Unlimited access to 7,000+ world-class courses, hands-on projects, and job-ready certificate programs - all included in your subscription

Learn more

Advance your career with an online degree

Earn a degree from world-class universities - 100% online

Explore degrees

Join over 3,400 global companies that choose Coursera for Business

Upskill your employees to excel in the digital economy

Learn more

Frequently asked questions

Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:

The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.
The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.

When you enroll in the course, you get access to all of the courses in the Specialization, and you earn a certificate when you complete the work. Your electronic Certificate will be added to your Accomplishments page - from there, you can print your Certificate or add it to your LinkedIn profile. If you only want to read and view the course content, you can audit the course for free.

If you subscribed, you get a 7-day free trial during which you can cancel at no penalty. After that, we don’t give refunds, but you can cancel your subscription at any time. See our full refund policy.

Real-Time Mission-Critical Systems Design

What you'll learn

Skills you'll gain

Details to know

See how employees at top companies are mastering in-demand skills

Build your subject-matter expertise

Earn a career certificate

There are 4 modules in this course

Device I/O interfaces and Drivers for Real-time Systems

What's included

Fault Tolerant Memory and Storage for Mission Critical Systems

What's included

Solving performance and reliability defects in real-time systems

What's included

Difference between high availability and high reliability for hard and soft real-time systems

What's included

Instructor

Offered by

Recommended if you're interested in Electrical Engineering

Introduction to FPGA Design for Embedded Systems

ARM Cortex (STM32) Deep Dive: Mastering Embedded Systems

Software Design and Architecture

Embedded Software Development with C

Build toward a degree

Master of Science in Electrical Engineering

Why people choose Coursera for their career

Open new doors with Coursera Plus

Advance your career with an online degree

Join over 3,400 global companies that choose Coursera for Business

Frequently asked questions

When will I have access to the lectures and assignments?

What will I get if I subscribe to this Specialization?

What is the refund policy?

More questions